{"id":1365,"date":"2013-01-17T03:28:57","date_gmt":"2013-01-17T03:28:57","guid":{"rendered":"http:\/\/achicon.com\/wpress\/?page_id=1365"},"modified":"2024-02-22T20:31:52","modified_gmt":"2024-02-22T19:31:52","slug":"material-contraincendio","status":"publish","type":"page","link":"https:\/\/www.sabo-esp.com\/en\/productos\/material-contraincendio\/","title":{"rendered":"Firefighting equipment"},"content":{"rendered":"


\n<\/p>\n

\n
\n

Proportioners<\/a><\/h3>\n
<\/div>\n<\/div>\n
\n

Foam Proportioners Description<\/a><\/h3>\n
The foam proportioners are used for mixing water at low, medium, or high expansion foam concentrate to feed either portable nozzles or small stationary plants. For the later case, the total flow rate must equal the flow rating of the mixer at its outlet pressure.
\nThey provide an inexpensive foam proportioning means for system requiring fixed flow rates and where available water supply pressures are adequate. The pressure drop across the foam proportioner will be approximately 30% of the supply line pressure, for this reason the typical operating pressure at the inlet of the foam proportioner should be between 5 - 8 bar (72.5.5 - 116 psi) depending on the model.<\/div>\n<\/div>\n
\n
\"SE-Z\"<\/a><\/div>\n

SE-Z<\/a><\/h3>\n
\nFoam proportioner mod. SE-Z
\nFor portable or fixed installations. Variable dosage.<\/div>\n<\/div>\n
\n
\"SE-ES\"<\/a><\/div>\n

SE-ES<\/a><\/h3>\n
\nIn line mixer mod. SE-ES
\nUsed for mixing water at low, medium, or high expansion foam concentrate to feed either portable nozzles or small stationary plants. For the later case, the total flow rate must equal the flow rating of the mixer at its outlet pressure.<\/div>\n<\/div>\n
\n
\"SE-VZ\"<\/a><\/div>\n

SE-VZ<\/a><\/h3>\n
\nBalanced pressure proportioner mod. SE-VZ
\nIt makes a constant mixture of foam liquid and water, regardless of the change in water pressure.<\/div>\n<\/div>\n
\n

Atmospherical foam concentrate tank<\/a><\/h3>\n
<\/div>\n<\/div>\n
\n

Description Atmospherical Foam Concentrate Tank<\/a><\/h3>\n
An atmospheric foam concentrate tank is one component of a foam proportioning system. The Sabo Espa\u00f1ola foam tanks are compatible with all foam concentrate.
\nAn atmospheric concentrate tank is typically used in conjunction with a Sabo Espanola \u201cbalanced pressure proportioner like the model SE-VZ, with the in- line proportioner or with a volumetric dosing system. Storage tanks shall be designed for storage of foam concentrate at atmospheric pressure and shall be available in vertical or horizontal version.<\/div>\n<\/div>\n
\n
\"SE-A-PE\"<\/a><\/div>\n

SE-A-PE<\/a><\/h3>\n
\nPolyethilene foam concentrate tank mod. SE-A-PE
\nPolyethilene PE100, UV stabilized.<\/div>\n<\/div>\n
\n
\"SE-DA\"<\/a><\/div>\n

SE-DA<\/a><\/h3>\n
\nAtmospherical foam concentrate tank mod. SE-DA
\nDesigned for fixed installations, it can be used with all kind of foam concentrate.<\/div>\n<\/div>\n
\n

Bladder Tank<\/a><\/h3>\n
<\/div>\n<\/div>\n
\n

Bladder Tank Description<\/a><\/h3>\n
The Bladder Tank is an essential part of the Bladder Tank Proportioning System.
\nThey require no external power, other than a supply of water to ensure proper operation.
\nThe Vertical and Horizontal Bladder tanks are designed and constructed in accordance with the latest revisions of I.S.P.E.S.L.or ASME code Section VIII for unfired pressure vessels. They have a working pressure of 12 bar (175 PSI) and they are tested to 17,2 bar (249,5 PSI). Used with a ratio controller, this system is designed to inject foam concentrate into a suitable water supply and to automatically proportion foam concentrate over a wide range of flows and pressures.<\/div>\n<\/div>\n
\n
\"SE-MXC-I\"<\/a><\/div>\n

SE-MXC-I<\/a><\/h3>\n
\nVertical pressure proportioning system with foam concentrate inside of the bladder mod. SE-MXC-I
\nFor stationary systems using low, medium or high expansion foam. It requires no electrical connection and therefore is suitable where absolute reliability and low maintenance are requirements. It is used for concentrate stocking. Its vertical configuration makes it ideal for areas with limited floor space but available height.<\/div>\n<\/div>\n
\n
\"SE-MXC-I-2X\"<\/a><\/div>\n

SE-MXC-I-2X<\/a><\/h3>\n
\nVertical pressure propotioning system (twin bladder tank) with foam concentrate inside of the bladder mod. SE-MXC-I-2X
\nSimilar to the proportioning system described above, this system comprises two tanks, allowing continuous fire-fighting capability even while one tank is being re-filled or serviced (including bladder replacement).<\/div>\n<\/div>\n
\n
\"SE-MXC-H-I\"<\/a><\/div>\n

SE-MXC-H-I<\/a><\/h3>\n
\nVertical pressure propotioning system (twin bladder tank) with foam concentrate inside of the bladder mod. SE-MXC-H-I
\nSimilar to the proportioning system described above, this system comprises two tanks, allowing continuous fire-fighting capability even while one tank is being re-filled or serviced (including bladder replacement).<\/div>\n<\/div>\n
\n
\"SE-MIX\"<\/a><\/div>\n

SE-MIX<\/a><\/h3>\n
\nProportionner for bladder tank. mod. SE-MIX
\nUsed with pressure proportioning systems<\/div>\n<\/div>\n
\n
\"SE-WRM\"<\/a><\/div>\n

SE-WRM<\/a><\/h3>\n
\nWide range mixer for pressure proportioning systems mod. SE-WRM
\nPrecise dosing at wide flow range. Bladder tank wide range proportioner.<\/div>\n<\/div>\n
\n
\"SE-HYD\"<\/a><\/div>\n

SE-HYD<\/a><\/h3>\n
\nHidrometer mod. SE-HYD
\nShows the foam height in the bladder tank. Specific for bladder tank.<\/div>\n<\/div>\n
\n

Monitors<\/a><\/h3>\n
<\/div>\n<\/div>\n
\n

Monitors Description<\/a><\/h3>\n
The Monitor is a device that delivers a large foam or water stream and normally is mounted on a stationary support that either is elevated or is at grade. The monitor can be fed solution by permanent piping or hose.<\/div>\n<\/div>\n
\n
\"Control<\/a><\/div>\n

Control panel<\/a><\/h3>\n
\nMONITORS ELECTRICAL CONTROL PANEL\n<\/div>\n<\/div>\n
\n
\"SE-KM-L\"<\/a><\/div>\n

SE-KM-L<\/a><\/h3>\n
\n\"Kobra\" manually lever operated monitor mod. SE-KM-L
\nManually operated directional controller. Suitably equipped for water supply nozzle (SE- CA), foam supply models (SE-LS) and (SE-LS- A), or \u201cFIREX\u201d nozzle (SE-FX) and (SE-FX- A), this unit is ideal for protecting warehouses, petroleum storage areas, refineries, tankers, fire-fighting ships and oil drilling platforms. It can also be mounted on mobile fire-fighting equipment, both trailers and self-powered.<\/div>\n<\/div>\n
\n
\"SE-KM-L-LP\"<\/a><\/div>\n

SE-KM-L-LP<\/a><\/h3>\n
\n\"Kobra\" manually lever operated monitor mod. SE-KM-L-LP
\nManual lever \u201cKOBRA\" low-profile monitor specially designed for monitor trailer application<\/p>\n<\/div>\n<\/div>\n
\n
\"SE-KM-L-BZ\"<\/a><\/div>\n

SE-KM-L-BZ<\/a><\/h3>\n
\nBronze lever monitor mod. SE-KM-L-BZ
\nManually operated directional controller. Suitably equipped for water supply nozzle (SE- CA), foam supply models (SE-LS) and (SE-LS- A), or \u201cFIREX\u201d nozzle (SE-FX) and (SE-FX- A), this unit is ideal for protecting warehouses, petroleum storage areas, refineries, tankers, fire-fighting ships and oil drilling platforms. It can also be mounted on mobile fire-fighting equipment, both trailers and self-powered.<\/div>\n<\/div>\n
\n
\"SE-KM-2V\"<\/a><\/div>\n

SE-KM-2V<\/a><\/h3>\n
\n\"Kobra\" manually lever operated monitor mod. SE-KM-2V
\nManually operated directional controller. Suitably equipped for water supply nozzle (SE- CA), foam supply models (SE-LS) and (SE-LS- A), or \u201cFIREX\u201d nozzle (SE-FX) and (SE-FX- A), this unit is ideal for protecting warehouses, petroleum storage areas, refineries, tankers, fire-fighting ships and oil drilling platforms. It can also be mounted on mobile fire-fighting equipment, both trailers and self-powered.<\/div>\n<\/div>\n
\n
\"SE-KM-2V-LP\"<\/a><\/div>\n

SE-KM-2V-LP<\/a><\/h3>\n
\n\"Kobra\" hand wheel operated monitor lower profile mod. SE-KM-2V-LP
\nManual double handwheel \u201cKOBRA\" low-profile monitor specially designed for monitor trailer application<\/p>\n<\/div>\n<\/div>\n
\n
\"SE-UA\"<\/a><\/div>\n

SE-UA<\/a><\/h3>\n
\nSelf-oscillating unit mod. SE-UA
\nSelf-powered oscillating unit with automatic horizontal movement. Can be deactivated or adjusted angle of coverage as necessary. Equipped with monitor and appropriate nozzle, water type (SE-CA), foam type (SE-LS) and (SE-LS-A), or \u201cFIREX\u201d nozzle (SE-FX) and (SE-FX-A), this unit is ideal for the protection of warehouses, petroleum storage areas, refineries, tankers, fire-fighting ships, and oil drilling platforms. It can also be mounted on mobile fire-fighting equipment.<\/div>\n<\/div>\n
\n
\"SE-UAKM-L\"<\/a><\/div>\n

SE-UAKM-L<\/a><\/h3>\n
\n\"Kobra\" oscillating lever operated monitor mod. SE-UAKM-L
\nSelf-powered oscillating unit with automatic horizontal movement. Can be deactivated or adjusted angle of coverage as necessary. Equipped with monitor and appropriate nozzle, water type (SE-CA), foam type (SE-LS) and (SE-LS-A), or \u201cFIREX\u201d nozzle (SE-FX) and (SE-FX-A), this unit is ideal for the protection of warehouses, petroleum storage areas, refineries, tankers, fire-fighting ships, and oil drilling platforms. It can also be mounted on mobile fire-fighting equipment.<\/div>\n<\/div>\n
\n
\"SE-UAKM-2V\"<\/a><\/div>\n

SE-UAKM-2V<\/a><\/h3>\n
\n\"Kobra\" oscillating hand-wheel operated monitor mod. SE-UAKM-V
\nSelf-powered oscillating unit with automatic horizontal movement. Can be deactivated or adjusted angle of coverage as necessary. Equipped with monitor and appropriate nozzle, water type (SE-CA), foam type (SE-LS) and (SE-LS-A), or \u201cFIREX\u201d nozzle (SE-FX) and (SE-FX-A), this unit is ideal for the protection of warehouses, petroleum storage areas, refineries, tankers, fire-fighting ships, and oil drilling platforms. It can also be mounted on mobile fire-fighting equipment.<\/div>\n<\/div>\n
\n
\"SE-EKM\"<\/a><\/div>\n

SE-EKM<\/a><\/h3>\n
\nElectrically operated remote controlled \"Kobra\" monitor mod. SE-EKM
\nDirectional controller, remote controlled electrically from a suitable control panel, this assembly is also available in an explosion- proof version. It has been especially designed for difficult-to-reach locations or those dangerous for the operator. It works with SE-EFX nozzle.<\/div>\n<\/div>\n
\n
\"SE-EKM<\/a><\/div>\n

SE-EKM ATEX<\/a><\/h3>\n
\nElectrically operated remote controlled \"Kobra\" monitor mod. SE-EKM ATEX
\nDirectional controller, remote controlled electrically from a suitable control panel, this assembly is also available in an explosion- proof version. It has been especially designed for difficult-to-reach locations or those dangerous for the operator.
\nIt works with SE-EFX nozzle.<\/div>\n<\/div>\n
\n
\"SE-EKM-HD<\/a><\/div>\n

SE-EKM-HD ATEX<\/a><\/h3>\n
\nElectrically operated monitor for corrosive atmosphere mod. SE-EKM-HD ATEX <\/p>\n<\/div>\n<\/div>\n
\n
\"SE-OKM\"<\/a><\/div>\n

SE-OKM<\/a><\/h3>\n
\nHydraulically operated remote controlled \"Kobra\" monitor mod. SE-OKM
\nDirectional controller, remotely operated hydraulically from a suitable control panel, this assembly is inherently explosion-proof, suitable for locations where explosive gases are present. An adequately sized hydraulic pump unit is required for operation. It has been especially designed for difficult-to-reach locations or those dangerous for the operator. It works with SE-OFX nozzle.<\/div>\n<\/div>\n
\n
\"Monitor<\/a><\/div>\n

Monitor performance diagrams<\/a><\/h3>\n
\n<\/div>\n<\/div>\n
\n
\"SE-P2\"<\/a><\/div>\n

SE-P2<\/a><\/h3>\n
\nLever monitor mod. SE-P2
\nLever operated monitor 2 1\u20442\u201d. Body in brass construction suitably equipped with nozzles (SE-ZZ \u00f3 SE-ZZ-A), this unit is ideal for protecting warehouses, petroleum storage areas, refineries, tankers, fire-fighting ships and oil drilling platforms. It can also be mounted on mobile fire-fighting equipment, both trailers and self-powered.<\/div>\n<\/div>\n
\n
\"SE-P3\"<\/a><\/div>\n

SE-P3<\/a><\/h3>\n
\nLever monitor mod. SE-P3
\nLever operated monitor. Body in brass construction 3\u201d diameter suitably equipped with nozzles (SE-ZZ \u00f3 SE-ZZ-A) ,this unit is ideal for protecting warehouses, petroleum storage areas, refineries, tankers, fire-fighting ships and oil drilling platforms. It can also be mounted on mobile fire-fighting equipment, both trailers and self-powered.<\/div>\n<\/div>\n
\n
\"SE-V3\"<\/a><\/div>\n

SE-V3<\/a><\/h3>\n
\nWheel monitor mod. SE-V3
\nHand wheel operated monitor 3\u201d brass construction.
\nSuitably equipped with nozzles(SE-ZZ \u00f3 SE- ZZ-A) ,this unit is ideal for protecting warehouses, petroleum storage areas, refineries, tankers, fire-fighting ships and oil drilling platforms. It can also be mounted on mobile fire-fighting equipment, both trailers and self-powered.<\/div>\n<\/div>\n
\n
\"SE-PRT\"<\/a><\/div>\n

SE-PRT<\/a><\/h3>\n
\nPortable monitor mod. SE-PRT
\nAluminium construction. Portable monitor with great stability.
\nSuitable for quick response water inlet by means of one or two 70 mm hoses. Suitably equipped with nozzles SE-Z-2.<\/div>\n<\/div>\n
\n
\"SE-MT\"<\/a><\/div>\n

SE-MT<\/a><\/h3>\n
\nMonitor trailer mod. SE-MT
\nWheeled assembly designed to support manual or automatic oscillating directional controllers.<\/div>\n<\/div>\n
\n
\"SE-MT-2A\"<\/a><\/div>\n

SE-MT-2A<\/a><\/h3>\n
\nMonitor trailer with tank mod. SE-MT-2A
\nWheeled assembly designed for manual or automatic oscillating directional controllers, utilizing vacuum feed of foam concentrate. A foam concentrate tank can be mounted on it.<\/div>\n<\/div>\n
\n
\"SE-MT-2R\"<\/a><\/div>\n

SE-MT-2R<\/a><\/h3>\n
\nMonitor trailer with two wheels mod. SE-MT-2R
\nTwo-wheeled monitor trailer without foam concentrate tank.<\/div>\n<\/div>\n
\n
\"SE-MT-4A\"<\/a><\/div>\n

SE-MT-4A<\/a><\/h3>\n
\nMonitor trailer with tank mod. SE-MT-4A
\n4-wheeled monitor trailer with 2000-litre metallic foam concentrate tank.<\/div>\n<\/div>\n
\n
\"SE-MT-4R\"<\/a><\/div>\n

SE-MT-4R<\/a><\/h3>\n
\nMonitor trailer with tank mod. SE-MT-4R
\nfour-wheeled monitor trailer without foam concentrate tank<\/div>\n<\/div>\n
\n
\"SE-MT-4R-IBC\"<\/a><\/div>\n

SE-MT-4R-IBC<\/a><\/h3>\n
\nFour wheels trailes with plastic foam agent tank mod. SE-MT-4R-IBC
\nFour-wheeled monitor trailer for 1000 litres foam concentrate IBC <\/div>\n<\/div>\n
\n
\"SE-TPM-F\"<\/a><\/div>\n

SE-TPM-F<\/a><\/h3>\n
\nFixed or rotating platform monitor tower mod. SE-TPM-G
\nA tower designed to support directional controllers, designed specifically for wharves and other areas requiring long water throw and altitude variation. Its angle of rotation is unlimited, and it offers good visibility.<\/div>\n<\/div>\n
\n
\"SE-TPM-G\"<\/a><\/div>\n

SE-TPM-G<\/a><\/h3>\n
\nFixed or rotating platform monitor tower mod. SE-TPM-G
\nA tower designed to support directional controllers, designed specifically for wharves and other areas requiring long water throw and altitude variation. Its angle of rotation is unlimited, and it offers good visibility.<\/div>\n<\/div>\n
\n

Monitors Branchpipe<\/a><\/h3>\n
<\/div>\n<\/div>\n
\n
\"SE-CA\"<\/a><\/div>\n

SE-CA<\/a><\/h3>\n
\nWater branchpipe mod. SE-CA
\nSuitable for monitors using only water.<\/div>\n<\/div>\n
\n
\"SE-LS\"<\/a><\/div>\n

SE-LS<\/a><\/h3>\n
\nFoam branchpipe mod. SE-LS
\nSuitable for discharging low expansion foam from monitors.<\/div>\n<\/div>\n
\n
\"SE-LS-A\"<\/a><\/div>\n

SE-LS-A<\/a><\/h3>\n
\nFoam branchpipe mod. SE-LS-A
\nSuitable for discharging low expansion foam from monitors. Vacuum feed version.<\/div>\n<\/div>\n
\n
\"Foam<\/a><\/div>\n

Foam branchpipes performance diagrams<\/a><\/h3>\n
\n<\/div>\n<\/div>\n
\n
\"SE-FX\"<\/a><\/div>\n

SE-FX<\/a><\/h3>\n
\n\"Firex\" nozzle water or premixed foam type, ful-flow \/ atomizing mod. SE-FX
\nWater or low expansion foam spraying device, manual regulation from atomizing to full-flow, designed for monitor application. Suitable both for stationary and mobile plants.<\/div>\n<\/div>\n
\n
\"SE-FX-30-BZ\"<\/a><\/div>\n

SE-FX-30-BZ<\/a><\/h3>\n
\n\"Firex\" nozzle water or premixed foam type, ful-flow \/ atomizing mod. SE-FX-30-BZ
\nWater or low expansion foam spraying device, manual regulation from atomizing to full-flow, designed for monitor application. Suitable both for stationary and mobile plants.<\/div>\n<\/div>\n
\n
\"SE-FX-A\"<\/a><\/div>\n

SE-FX-A<\/a><\/h3>\n
\n\"Firex\" nozzle water or premixed foam type, ful-flow \/ atomizing mod. SE-FX-A
\nWater or low expansion foam spraying device, manual regulation from atomizing to full-flow, designed for monitor application. Suitable both for stationary and mobile plants.<\/div>\n<\/div>\n
\n
\"SE-FX-A-30-BZ\"<\/a><\/div>\n

SE-FX-A-30-BZ<\/a><\/h3>\n
\n\"Firex\" nozzle water or premixed foam type, ful-flow \/ atomizing mod. SE-FX-A-30-BZ
\nWater or low expansion foam spraying device, manual regulation from atomizing to full-flow, designed for monitor application. Suitable both for stationary and mobile plants.<\/div>\n<\/div>\n
\n
\"SE-EFX-EC\"<\/a><\/div>\n

SE-EFX-EC<\/a><\/h3>\n
\n\"Firex\" electrically operated remote control water or premixed foam type, full-flow \/ atomizing nozzle mod. SE-EFX-EC
\nWater or low expansion foam spraying device, with electrically operated remote control for stream adjustment (atomising to full-flow), designed for application with stationary plant monitors (SE-EKM model), including explosion-proof versions.<\/div>\n<\/div>\n
\n
\"SE-EFX-EC<\/a><\/div>\n

SE-EFX-EC ATEX<\/a><\/h3>\n
\nElectrically operated firex nozzle for corrosive atmosphere mod. SE-EFX-EC ATEX <\/p>\n<\/div>\n<\/div>\n
\n
\"SE-EFX-HD<\/a><\/div>\n

SE-EFX-HD ATEX<\/a><\/h3>\n
\nElectrically operated firex nozzle for corrosive atmosphere mod. SE-EFX-HD ATEX <\/p>\n<\/div>\n<\/div>\n
\n
\"SE-OFX\"<\/a><\/div>\n

SE-OFX<\/a><\/h3>\n
\n\"Firex\" electrically operated remote control water or pre-mixed foam type, full-flow \/ atomizing nozzle mod. SE-OFX
\nWater or low expansion foam spraying device, with hydraulically operated remote control for stream adjustment (atomising to full-flow), designed for application with monitors (SE- OKM model), stationary plant types.<\/div>\n<\/div>\n
\n
\""Firex"<\/a><\/div>\n

"Firex" nozzle performance diagrams<\/a><\/h3>\n
\n<\/div>\n<\/div>\n
\n
\"SE-ZZ\"<\/a><\/div>\n

SE-ZZ<\/a><\/h3>\n
\nFirex nozzle mod. SE-ZZ
\nBrass construction.
\nMultiple flow rates 2 1\u20442\u201d inlet.
\nManual regulation from atomizing to full- flow.<\/div>\n<\/div>\n
\n
\"SE-ZZ-A\"<\/a><\/div>\n

SE-ZZ-A<\/a><\/h3>\n
\nFirex nozzle mod. SE-ZZ-A
\nBrass construction.
\nNormal regulation from atomizing to full suitable for marine ambient.<\/div>\n<\/div>\n
\n

Low expansion<\/a><\/h3>\n
<\/div>\n<\/div>\n
\n

Low Expansion Foam System Description<\/a><\/h3>\n
Low expansion foam has an expansion of up to 20:1.
\nThe advantage of low expansion foam compared to the other type of foam is the greater throw range and superior cooling effect, heat resistance and burn back resistance achieved by the higher water content. This characteristic make difficult to build up great depth of foam and can cause severe water damage in warehouse etc.
\nThe most common systems to disburse the low expansion foam include the foam branch pipe and the foam nozzle.<\/div>\n<\/div>\n
\n
\"SE-UAS\"<\/a><\/div>\n

SE-UAS<\/a><\/h3>\n
\nLow expansion water \/ Foam nozzle mod. SE-UAS
\nUsed with stationary plants protecting various types of rooms, warehouses, storage areas, both with water and water\/low expansion foam mixtures.<\/div>\n<\/div>\n
\n
\"SE-LBK\"<\/a><\/div>\n

SE-LBK<\/a><\/h3>\n
\nPortable foam branchpipe mod. SE-LBK
\nSuitable for operations with low expansion foam concentrate.<\/div>\n<\/div>\n
\n
\"SE-LBK-A\"<\/a><\/div>\n

SE-LBK-A<\/a><\/h3>\n
\nPortable Foam branchpipe mod. SE-LBK-A
\nSuitable for operations with low expansion foam concentrate.<\/div>\n<\/div>\n
\n
\"SE-CS\"<\/a><\/div>\n

SE-CS<\/a><\/h3>\n
\nFoam chamber mod. SE-CS
\nBody and flanges in carbon steel. Also possible in stainless steel.
\nFoam agent mixer included.
\nGlas rupture disk.<\/div>\n<\/div>\n
\n
\"SE-CE\"<\/a><\/div>\n

SE-CE<\/a><\/h3>\n
\nFoam chamber mod. SE-CE
\nBody and flanges in carbon steel. Also possible in stainless steel.
\nFoam agent mixer included.
\nGlas rupture disk.<\/div>\n<\/div>\n
\n
\"SE-VKS\"<\/a><\/div>\n

SE-VKS<\/a><\/h3>\n
\nFoam pourer mod. SE-VKS
\nComplement to foam chambers SE-CS, SE-CE.<\/div>\n<\/div>\n
\n
\"SE-LF\"<\/a><\/div>\n

SE-LF<\/a><\/h3>\n
\nFixed foam maker mod. SE-LF
\nFor stationary plants with low expansion foam, used for roof located floating tank or container basins fire protection.<\/div>\n<\/div>\n
\n
\"SE-VF\"<\/a><\/div>\n

SE-VF<\/a><\/h3>\n
\nFoam pourer mod. SE-VF
\nUsed with model SE-CE foam chamber and model LF fixed foam nozzle.<\/div>\n<\/div>\n
\n
\"SE-SHIELD-S\"<\/a><\/div>\n

SE-SHIELD-S<\/a><\/h3>\n
\nRimseal foam pourer mod. SE-SHIELD-S
\nFor stationary plants with low expansion foam, used for floating roof tank. Foam generation on the rimseal. Able to test without pouring foam to the tank.<\/div>\n<\/div>\n
\n
\"SE-BH\"<\/a><\/div>\n

SE-BH<\/a><\/h3>\n
\nRimseal foam pourer mod. SE-BH
\nFor stationary plants with low expansion foam, used for floating roof tank. Foam generation on the rimseal. Able to test without pouring foam to the tank.<\/div>\n<\/div>\n
\n
\"SE-K\"<\/a><\/div>\n

SE-K<\/a><\/h3>\n
\nHigh backpressure fixed foam maker mod. SE-K
\nSpecific fixed foam maker for tank. High backpressure maker.<\/div>\n<\/div>\n
\n

Medium expansion<\/a><\/h3>\n
<\/div>\n<\/div>\n
\n

Medium Expansion Foam System Description<\/a><\/h3>\n
Medium expansion foams are aggregations of bubbles that are mechanically generated by the passage of air or other gases through a net, screen, or other porous medium that is wetted by an aqueous solution of surface active foaming agents. Under proper conditions, fire-fighting foams of expansions from 20:1 to 200:1 can be generated.
\nThese foams provide a unique agent for transporting water to inaccessible places; for total flooding of confined spaces; and for volumetric displacement of vapour, heat, and smoke. Optimum efficiency in any type of hazard depends to some extent on the rate of application and the foam expansion and stability.<\/div>\n<\/div>\n
\n
\"SE-UME\"<\/a><\/div>\n

SE-UME<\/a><\/h3>\n
\nMedium expansion foam nozzle mod. SE-UME
\nUsed in stationary plants protecting various types of storage rooms, etc., where medium expansion foam is indicated.<\/div>\n<\/div>\n
\n
\"SE-SME\"<\/a><\/div>\n

SE-SME<\/a><\/h3>\n
\nMedium expansion foam branchpipe mod. SE-SME
\nSuitable as a portable nozzle or as a foam pourer nozzle for stationary plants having partial or total saturation.<\/div>\n<\/div>\n
\n
\"SE-SME<\/a><\/div>\n

SE-SME 12 SE-SME 16<\/a><\/h3>\n
\nMedium expansion foam branchpipe mod. SE-SME 12 SE-SME 16
\nSuitable as a portable nozzle or as a foam pourer nozzle for stationary plants having partial or total saturation.<\/div>\n<\/div>\n
\n
\"SE-SME<\/a><\/div>\n

SE-SME 18 SE-SME 24<\/a><\/h3>\n
\nMedium expansion foam branchpipe mod. SE-SME 18 SE-SME 24
\nSuitable as a portable nozzle or as a foam pourer nozzle for stationary plants having partial or total saturation.<\/div>\n<\/div>\n
\n

High expansion<\/a><\/h3>\n
<\/div>\n<\/div>\n
\n

High Expansion Foam System Descritption<\/a><\/h3>\n
A detailed analysis of cases of fires in recent years shows that not always the traditional fire-fighting systems, which mainly use water or low or medium expansion foam ensure the effectiveness of any intervention.
\nThe main cause of this failure is due to the inability for that solution to reach quickly the fire source, in some cases, the presence of explosive dust or chemical gas during combustion makes the standard protection systems not valid.<\/p>\n

High-expansion foam systems operate in a combined action on fire, creating a layer of foam that carries water at the point where the heat is developed and the congestion in the area of risk smothers the fire, removing toxic vapors and particles developed during combustion.<\/p><\/div>\n<\/div>\n

\n
\"SE-GAE<\/a><\/div>\n

SE-GAE 100<\/a><\/h3>\n
\nHigh expansion foam generator mod. SE-GAE 100
\nUsed with stationary plants protecting closed rooms where full volume saturated fire extinction is necessary.<\/div>\n<\/div>\n
\n
\"SE-GAE<\/a><\/div>\n

SE-GAE 250 SE-GAE 400<\/a><\/h3>\n
\nHigh expansion foam generator mod. SE-GAE 250 SE-GAE 400
\nUsed with stationary plants protecting closed rooms where full volume saturated fire extinction...<\/div>\n<\/div>\n
\n
\"SE-GAE<\/a><\/div>\n

SE-GAE 500 SE-GAE 800<\/a><\/h3>\n
\nHigh expansion foam generator mod. SE-GAE 500 SE-GAE 800
\nUsed with stationary plants protecting closed rooms where full volume saturated fire extinction...<\/div>\n<\/div>\n
\n

Others<\/a><\/h3>\n
<\/div>\n<\/div>\n
\n
\"SE-F,<\/a><\/div>\n

SE-F, FD<\/a><\/h3>\n
\nFlat jet spray nozzles (angle 140\u00ba) mod. SE-F, FD\n<\/div>\n<\/div>\n
\n
\"SE-K_KX\"<\/a><\/div>\n

SE-K_KX<\/a><\/h3>\n
\nBoquillas pulverizadoras de chorro plano con angulo de 120\u00ba mod. SE-K_KX
\nBoquillas para refrigeraci\u00f3n de tanques (chorro plano).<\/div>\n<\/div>\n
\n
\"SE-GA\"<\/a><\/div>\n

SE-GA<\/a><\/h3>\n
\nLarge flow nozzles mod. SE-GA
\nScreen and tank cooling nozzles (flat jet).<\/div>\n<\/div>\n
\n
\"SE-D\"<\/a><\/div>\n

SE-D<\/a><\/h3>\n
\nFull cone nozzles mod. SE-D
\nTank cooling nozzles (full jet).<\/div>\n<\/div>\n
\n
\"SE-FC\"<\/a><\/div>\n

SE-FC<\/a><\/h3>\n
\nFull cone nozzles mod. SE-FC\n<\/div>\n<\/div>\n
\n
\"SE-E\"<\/a><\/div>\n

SE-E<\/a><\/h3>\n
\nSpiral nozzles mod. SE-E
\nSpiral nozzles for tank cooling (full jet).<\/div>\n<\/div>\n
\n
\"SE-GM\"<\/a><\/div>\n

SE-GM<\/a><\/h3>\n
\nMobile foam equipment mod. SE-GM
\nBuggy, 100 litres capacity deposit made in polyester resin.
\nProportioner SE-Z-2, SE-LBK-2 foam branchpipe, 15mm ARMTEX hose and accessories. Designed for first intervention equipments.<\/div>\n<\/div>\n
\n
\"SE-HS\"<\/a><\/div>\n

SE-HS<\/a><\/h3>\n
\nHydro Shields mod. SE-HS
\nWater Curtain maker.
\nAvailable in 1 1\u20442\u201d or 2 1\u20442\u201d for fixer construction. Material: stainless steel. Threaded connection for quickconnection coupling.<\/div>\n<\/div>\n<\/div>\n

<\/p>","protected":false},"excerpt":{"rendered":"

Proportioners Foam Proportioners Description The foam proportioners are used for mixing water at low, medium, or high expansion foam concentrate to feed either portable nozzles or small stationary plants. For the later case, the total flow rate must equal the flow rating of the mixer at its outlet pressure. They provide an inexpensive foam proportioning […]<\/p>\n","protected":false},"author":1,"featured_media":0,"parent":1359,"menu_order":2,"comment_status":"closed","ping_status":"closed","template":"","meta":[],"_links":{"self":[{"href":"https:\/\/www.sabo-esp.com\/en\/wp-json\/wp\/v2\/pages\/1365"}],"collection":[{"href":"https:\/\/www.sabo-esp.com\/en\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/www.sabo-esp.com\/en\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/www.sabo-esp.com\/en\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.sabo-esp.com\/en\/wp-json\/wp\/v2\/comments?post=1365"}],"version-history":[{"count":14,"href":"https:\/\/www.sabo-esp.com\/en\/wp-json\/wp\/v2\/pages\/1365\/revisions"}],"predecessor-version":[{"id":5712,"href":"https:\/\/www.sabo-esp.com\/en\/wp-json\/wp\/v2\/pages\/1365\/revisions\/5712"}],"up":[{"embeddable":true,"href":"https:\/\/www.sabo-esp.com\/en\/wp-json\/wp\/v2\/pages\/1359"}],"wp:attachment":[{"href":"https:\/\/www.sabo-esp.com\/en\/wp-json\/wp\/v2\/media?parent=1365"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}