Low Expansion Foam System Description<\/a><\/h3>\nLow expansion foam has an expansion of up to 20:1.
\nThe advantage of low expansion foam compared to the other type of foam is the greater throw range and superior cooling effect, heat resistance and burn back resistance achieved by the higher water content. This characteristic make difficult to build up great depth of foam and can cause severe water damage in warehouse etc.
\nThe most common systems to disburse the low expansion foam include the foam branch pipe and the foam nozzle.<\/div>\n<\/div>\n\n![\"SE-UAS\"](\"\/render\/se-uas.png\")
<\/a><\/div>\nSE-UAS<\/a><\/h3>\n\nLow expansion water \/ Foam nozzle mod. SE-UAS
\nUsed with stationary plants protecting various types of rooms, warehouses, storage areas, both with water and water\/low expansion foam mixtures.<\/div>\n<\/div>\n\n![\"SE-LBK\"](\"\/render\/se-lbk.png\")
<\/a><\/div>\nSE-LBK<\/a><\/h3>\n\nPortable foam branchpipe mod. SE-LBK
\nSuitable for operations with low expansion foam concentrate.<\/div>\n<\/div>\n\n![\"SE-LBK-A\"](\"\/render\/se-lbk-a.png\")
<\/a><\/div>\nSE-LBK-A<\/a><\/h3>\n\nPortable Foam branchpipe mod. SE-LBK-A
\nSuitable for operations with low expansion foam concentrate.<\/div>\n<\/div>\n\n![\"SE-CS\"](\"\/render\/se-cs.png\")
<\/a><\/div>\nSE-CS<\/a><\/h3>\n\nFoam chamber mod. SE-CS
\nBody and flanges in carbon steel. Also possible in stainless steel.
\nFoam agent mixer included.
\nGlas rupture disk.<\/div>\n<\/div>\n\n![\"SE-CE\"](\"\/render\/se-ce.png\")
<\/a><\/div>\nSE-CE<\/a><\/h3>\n\nFoam chamber mod. SE-CE
\nBody and flanges in carbon steel. Also possible in stainless steel.
\nFoam agent mixer included.
\nGlas rupture disk.<\/div>\n<\/div>\n\n![\"SE-VKS\"](\"\/render\/se-vks.png\")
<\/a><\/div>\nSE-VKS<\/a><\/h3>\n\nFoam pourer mod. SE-VKS
\nComplement to foam chambers SE-CS, SE-CE.<\/div>\n<\/div>\n\n![\"SE-LF\"](\"\/render\/se-lf.png\")
<\/a><\/div>\nSE-LF<\/a><\/h3>\n\nFixed foam maker mod. SE-LF
\nFor stationary plants with low expansion foam, used for roof located floating tank or container basins fire protection.<\/div>\n<\/div>\n\n![\"SE-VF\"](\"\/render\/se-vf.png\")
<\/a><\/div>\nSE-VF<\/a><\/h3>\n\nFoam pourer mod. SE-VF
\nUsed with model SE-CE foam chamber and model LF fixed foam nozzle.<\/div>\n<\/div>\n\n![\"SE-SHIELD-S\"](\"\/render\/se-shield-s.png\")
<\/a><\/div>\nSE-SHIELD-S<\/a><\/h3>\n\nRimseal foam pourer mod. SE-SHIELD-S
\nFor stationary plants with low expansion foam, used for floating roof tank. Foam generation on the rimseal. Able to test without pouring foam to the tank.<\/div>\n<\/div>\n\n![\"SE-BH\"](\"\/render\/se-bh.png\")
<\/a><\/div>\nSE-BH<\/a><\/h3>\n\nRimseal foam pourer mod. SE-BH
\nFor stationary plants with low expansion foam, used for floating roof tank. Foam generation on the rimseal. Able to test without pouring foam to the tank.<\/div>\n<\/div>\n\n![\"SE-K\"](\"\/render\/se-k.png\")
<\/a><\/div>\nSE-K<\/a><\/h3>\n\nHigh backpressure fixed foam maker mod. SE-K
\nSpecific fixed foam maker for tank. High backpressure maker.<\/div>\n<\/div>\n<\/div>\n<\/p>","protected":false},"excerpt":{"rendered":"
Low Expansion Foam System Description Low expansion foam has an expansion of up to 20:1. The advantage of low expansion foam compared to the other type of foam is the greater throw range and superior cooling effect, heat resistance and burn back resistance achieved by the higher water content. This characteristic make difficult to build […]<\/p>\n","protected":false},"author":1,"featured_media":0,"parent":1365,"menu_order":6,"comment_status":"closed","ping_status":"closed","template":"template-fullwidth.php","meta":[],"_links":{"self":[{"href":"https:\/\/www.sabo-esp.com\/en\/wp-json\/wp\/v2\/pages\/1661"}],"collection":[{"href":"https:\/\/www.sabo-esp.com\/en\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/www.sabo-esp.com\/en\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/www.sabo-esp.com\/en\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.sabo-esp.com\/en\/wp-json\/wp\/v2\/comments?post=1661"}],"version-history":[{"count":3,"href":"https:\/\/www.sabo-esp.com\/en\/wp-json\/wp\/v2\/pages\/1661\/revisions"}],"predecessor-version":[{"id":3775,"href":"https:\/\/www.sabo-esp.com\/en\/wp-json\/wp\/v2\/pages\/1661\/revisions\/3775"}],"up":[{"embeddable":true,"href":"https:\/\/www.sabo-esp.com\/en\/wp-json\/wp\/v2\/pages\/1365"}],"wp:attachment":[{"href":"https:\/\/www.sabo-esp.com\/en\/wp-json\/wp\/v2\/media?parent=1661"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
\nThe advantage of low expansion foam compared to the other type of foam is the greater throw range and superior cooling effect, heat resistance and burn back resistance achieved by the higher water content. This characteristic make difficult to build up great depth of foam and can cause severe water damage in warehouse etc.
\nThe most common systems to disburse the low expansion foam include the foam branch pipe and the foam nozzle.<\/div>\n<\/div>\n
<\/a><\/div>\nSE-UAS<\/a><\/h3>\n\nLow expansion water \/ Foam nozzle mod. SE-UAS
\nUsed with stationary plants protecting various types of rooms, warehouses, storage areas, both with water and water\/low expansion foam mixtures.<\/div>\n<\/div>\n\n<\/a><\/div>\nSE-LBK<\/a><\/h3>\n\nPortable foam branchpipe mod. SE-LBK
\nSuitable for operations with low expansion foam concentrate.<\/div>\n<\/div>\n\n<\/a><\/div>\nSE-LBK-A<\/a><\/h3>\n\nPortable Foam branchpipe mod. SE-LBK-A
\nSuitable for operations with low expansion foam concentrate.<\/div>\n<\/div>\n\n<\/a><\/div>\nSE-CS<\/a><\/h3>\n\nFoam chamber mod. SE-CS
\nBody and flanges in carbon steel. Also possible in stainless steel.
\nFoam agent mixer included.
\nGlas rupture disk.<\/div>\n<\/div>\n\n<\/a><\/div>\nSE-CE<\/a><\/h3>\n\nFoam chamber mod. SE-CE
\nBody and flanges in carbon steel. Also possible in stainless steel.
\nFoam agent mixer included.
\nGlas rupture disk.<\/div>\n<\/div>\n\n<\/a><\/div>\nSE-VKS<\/a><\/h3>\n\nFoam pourer mod. SE-VKS
\nComplement to foam chambers SE-CS, SE-CE.<\/div>\n<\/div>\n\n<\/a><\/div>\nSE-LF<\/a><\/h3>\n\nFixed foam maker mod. SE-LF
\nFor stationary plants with low expansion foam, used for roof located floating tank or container basins fire protection.<\/div>\n<\/div>\n\n<\/a><\/div>\nSE-VF<\/a><\/h3>\n\nFoam pourer mod. SE-VF
\nUsed with model SE-CE foam chamber and model LF fixed foam nozzle.<\/div>\n<\/div>\n\n<\/a><\/div>\nSE-SHIELD-S<\/a><\/h3>\n\nRimseal foam pourer mod. SE-SHIELD-S
\nFor stationary plants with low expansion foam, used for floating roof tank. Foam generation on the rimseal. Able to test without pouring foam to the tank.<\/div>\n<\/div>\n\n<\/a><\/div>\nSE-BH<\/a><\/h3>\n\nRimseal foam pourer mod. SE-BH
\nFor stationary plants with low expansion foam, used for floating roof tank. Foam generation on the rimseal. Able to test without pouring foam to the tank.<\/div>\n<\/div>\n\n<\/a><\/div>\nSE-K<\/a><\/h3>\n\nHigh backpressure fixed foam maker mod. SE-K
\nSpecific fixed foam maker for tank. High backpressure maker.<\/div>\n<\/div>\n<\/div>\n<\/p>","protected":false},"excerpt":{"rendered":"
Low Expansion Foam System Description Low expansion foam has an expansion of up to 20:1. The advantage of low expansion foam compared to the other type of foam is the greater throw range and superior cooling effect, heat resistance and burn back resistance achieved by the higher water content. This characteristic make difficult to build […]<\/p>\n","protected":false},"author":1,"featured_media":0,"parent":1365,"menu_order":6,"comment_status":"closed","ping_status":"closed","template":"template-fullwidth.php","meta":[],"_links":{"self":[{"href":"https:\/\/www.sabo-esp.com\/en\/wp-json\/wp\/v2\/pages\/1661"}],"collection":[{"href":"https:\/\/www.sabo-esp.com\/en\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/www.sabo-esp.com\/en\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/www.sabo-esp.com\/en\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.sabo-esp.com\/en\/wp-json\/wp\/v2\/comments?post=1661"}],"version-history":[{"count":3,"href":"https:\/\/www.sabo-esp.com\/en\/wp-json\/wp\/v2\/pages\/1661\/revisions"}],"predecessor-version":[{"id":3775,"href":"https:\/\/www.sabo-esp.com\/en\/wp-json\/wp\/v2\/pages\/1661\/revisions\/3775"}],"up":[{"embeddable":true,"href":"https:\/\/www.sabo-esp.com\/en\/wp-json\/wp\/v2\/pages\/1365"}],"wp:attachment":[{"href":"https:\/\/www.sabo-esp.com\/en\/wp-json\/wp\/v2\/media?parent=1661"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
\nUsed with stationary plants protecting various types of rooms, warehouses, storage areas, both with water and water\/low expansion foam mixtures.<\/div>\n<\/div>\n
<\/a><\/div>\nSE-LBK<\/a><\/h3>\n\nPortable foam branchpipe mod. SE-LBK
\nSuitable for operations with low expansion foam concentrate.<\/div>\n<\/div>\n\n<\/a><\/div>\nSE-LBK-A<\/a><\/h3>\n\nPortable Foam branchpipe mod. SE-LBK-A
\nSuitable for operations with low expansion foam concentrate.<\/div>\n<\/div>\n\n<\/a><\/div>\nSE-CS<\/a><\/h3>\n\nFoam chamber mod. SE-CS
\nBody and flanges in carbon steel. Also possible in stainless steel.
\nFoam agent mixer included.
\nGlas rupture disk.<\/div>\n<\/div>\n\n<\/a><\/div>\nSE-CE<\/a><\/h3>\n\nFoam chamber mod. SE-CE
\nBody and flanges in carbon steel. Also possible in stainless steel.
\nFoam agent mixer included.
\nGlas rupture disk.<\/div>\n<\/div>\n\n<\/a><\/div>\nSE-VKS<\/a><\/h3>\n\nFoam pourer mod. SE-VKS
\nComplement to foam chambers SE-CS, SE-CE.<\/div>\n<\/div>\n\n<\/a><\/div>\nSE-LF<\/a><\/h3>\n\nFixed foam maker mod. SE-LF
\nFor stationary plants with low expansion foam, used for roof located floating tank or container basins fire protection.<\/div>\n<\/div>\n\n<\/a><\/div>\nSE-VF<\/a><\/h3>\n\nFoam pourer mod. SE-VF
\nUsed with model SE-CE foam chamber and model LF fixed foam nozzle.<\/div>\n<\/div>\n\n<\/a><\/div>\nSE-SHIELD-S<\/a><\/h3>\n\nRimseal foam pourer mod. SE-SHIELD-S
\nFor stationary plants with low expansion foam, used for floating roof tank. Foam generation on the rimseal. Able to test without pouring foam to the tank.<\/div>\n<\/div>\n\n<\/a><\/div>\nSE-BH<\/a><\/h3>\n\nRimseal foam pourer mod. SE-BH
\nFor stationary plants with low expansion foam, used for floating roof tank. Foam generation on the rimseal. Able to test without pouring foam to the tank.<\/div>\n<\/div>\n\n<\/a><\/div>\nSE-K<\/a><\/h3>\n\nHigh backpressure fixed foam maker mod. SE-K
\nSpecific fixed foam maker for tank. High backpressure maker.<\/div>\n<\/div>\n<\/div>\n<\/p>","protected":false},"excerpt":{"rendered":"
Low Expansion Foam System Description Low expansion foam has an expansion of up to 20:1. The advantage of low expansion foam compared to the other type of foam is the greater throw range and superior cooling effect, heat resistance and burn back resistance achieved by the higher water content. This characteristic make difficult to build […]<\/p>\n","protected":false},"author":1,"featured_media":0,"parent":1365,"menu_order":6,"comment_status":"closed","ping_status":"closed","template":"template-fullwidth.php","meta":[],"_links":{"self":[{"href":"https:\/\/www.sabo-esp.com\/en\/wp-json\/wp\/v2\/pages\/1661"}],"collection":[{"href":"https:\/\/www.sabo-esp.com\/en\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/www.sabo-esp.com\/en\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/www.sabo-esp.com\/en\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.sabo-esp.com\/en\/wp-json\/wp\/v2\/comments?post=1661"}],"version-history":[{"count":3,"href":"https:\/\/www.sabo-esp.com\/en\/wp-json\/wp\/v2\/pages\/1661\/revisions"}],"predecessor-version":[{"id":3775,"href":"https:\/\/www.sabo-esp.com\/en\/wp-json\/wp\/v2\/pages\/1661\/revisions\/3775"}],"up":[{"embeddable":true,"href":"https:\/\/www.sabo-esp.com\/en\/wp-json\/wp\/v2\/pages\/1365"}],"wp:attachment":[{"href":"https:\/\/www.sabo-esp.com\/en\/wp-json\/wp\/v2\/media?parent=1661"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
\nSuitable for operations with low expansion foam concentrate.<\/div>\n<\/div>\n
<\/a><\/div>\nSE-LBK-A<\/a><\/h3>\n\nPortable Foam branchpipe mod. SE-LBK-A
\nSuitable for operations with low expansion foam concentrate.<\/div>\n<\/div>\n\n<\/a><\/div>\nSE-CS<\/a><\/h3>\n\nFoam chamber mod. SE-CS
\nBody and flanges in carbon steel. Also possible in stainless steel.
\nFoam agent mixer included.
\nGlas rupture disk.<\/div>\n<\/div>\n\n<\/a><\/div>\nSE-CE<\/a><\/h3>\n\nFoam chamber mod. SE-CE
\nBody and flanges in carbon steel. Also possible in stainless steel.
\nFoam agent mixer included.
\nGlas rupture disk.<\/div>\n<\/div>\n\n<\/a><\/div>\nSE-VKS<\/a><\/h3>\n\nFoam pourer mod. SE-VKS
\nComplement to foam chambers SE-CS, SE-CE.<\/div>\n<\/div>\n\n<\/a><\/div>\nSE-LF<\/a><\/h3>\n\nFixed foam maker mod. SE-LF
\nFor stationary plants with low expansion foam, used for roof located floating tank or container basins fire protection.<\/div>\n<\/div>\n\n<\/a><\/div>\nSE-VF<\/a><\/h3>\n\nFoam pourer mod. SE-VF
\nUsed with model SE-CE foam chamber and model LF fixed foam nozzle.<\/div>\n<\/div>\n\n<\/a><\/div>\nSE-SHIELD-S<\/a><\/h3>\n\nRimseal foam pourer mod. SE-SHIELD-S
\nFor stationary plants with low expansion foam, used for floating roof tank. Foam generation on the rimseal. Able to test without pouring foam to the tank.<\/div>\n<\/div>\n\n<\/a><\/div>\nSE-BH<\/a><\/h3>\n\nRimseal foam pourer mod. SE-BH
\nFor stationary plants with low expansion foam, used for floating roof tank. Foam generation on the rimseal. Able to test without pouring foam to the tank.<\/div>\n<\/div>\n\n<\/a><\/div>\nSE-K<\/a><\/h3>\n\nHigh backpressure fixed foam maker mod. SE-K
\nSpecific fixed foam maker for tank. High backpressure maker.<\/div>\n<\/div>\n<\/div>\n<\/p>","protected":false},"excerpt":{"rendered":"
Low Expansion Foam System Description Low expansion foam has an expansion of up to 20:1. The advantage of low expansion foam compared to the other type of foam is the greater throw range and superior cooling effect, heat resistance and burn back resistance achieved by the higher water content. This characteristic make difficult to build […]<\/p>\n","protected":false},"author":1,"featured_media":0,"parent":1365,"menu_order":6,"comment_status":"closed","ping_status":"closed","template":"template-fullwidth.php","meta":[],"_links":{"self":[{"href":"https:\/\/www.sabo-esp.com\/en\/wp-json\/wp\/v2\/pages\/1661"}],"collection":[{"href":"https:\/\/www.sabo-esp.com\/en\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/www.sabo-esp.com\/en\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/www.sabo-esp.com\/en\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.sabo-esp.com\/en\/wp-json\/wp\/v2\/comments?post=1661"}],"version-history":[{"count":3,"href":"https:\/\/www.sabo-esp.com\/en\/wp-json\/wp\/v2\/pages\/1661\/revisions"}],"predecessor-version":[{"id":3775,"href":"https:\/\/www.sabo-esp.com\/en\/wp-json\/wp\/v2\/pages\/1661\/revisions\/3775"}],"up":[{"embeddable":true,"href":"https:\/\/www.sabo-esp.com\/en\/wp-json\/wp\/v2\/pages\/1365"}],"wp:attachment":[{"href":"https:\/\/www.sabo-esp.com\/en\/wp-json\/wp\/v2\/media?parent=1661"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
\nSuitable for operations with low expansion foam concentrate.<\/div>\n<\/div>\n
<\/a><\/div>\nSE-CS<\/a><\/h3>\n\nFoam chamber mod. SE-CS
\nBody and flanges in carbon steel. Also possible in stainless steel.
\nFoam agent mixer included.
\nGlas rupture disk.<\/div>\n<\/div>\n\n<\/a><\/div>\nSE-CE<\/a><\/h3>\n\nFoam chamber mod. SE-CE
\nBody and flanges in carbon steel. Also possible in stainless steel.
\nFoam agent mixer included.
\nGlas rupture disk.<\/div>\n<\/div>\n\n<\/a><\/div>\nSE-VKS<\/a><\/h3>\n\nFoam pourer mod. SE-VKS
\nComplement to foam chambers SE-CS, SE-CE.<\/div>\n<\/div>\n\n<\/a><\/div>\nSE-LF<\/a><\/h3>\n\nFixed foam maker mod. SE-LF
\nFor stationary plants with low expansion foam, used for roof located floating tank or container basins fire protection.<\/div>\n<\/div>\n\n<\/a><\/div>\nSE-VF<\/a><\/h3>\n\nFoam pourer mod. SE-VF
\nUsed with model SE-CE foam chamber and model LF fixed foam nozzle.<\/div>\n<\/div>\n\n<\/a><\/div>\nSE-SHIELD-S<\/a><\/h3>\n\nRimseal foam pourer mod. SE-SHIELD-S
\nFor stationary plants with low expansion foam, used for floating roof tank. Foam generation on the rimseal. Able to test without pouring foam to the tank.<\/div>\n<\/div>\n\n<\/a><\/div>\nSE-BH<\/a><\/h3>\n\nRimseal foam pourer mod. SE-BH
\nFor stationary plants with low expansion foam, used for floating roof tank. Foam generation on the rimseal. Able to test without pouring foam to the tank.<\/div>\n<\/div>\n\n<\/a><\/div>\nSE-K<\/a><\/h3>\n\nHigh backpressure fixed foam maker mod. SE-K
\nSpecific fixed foam maker for tank. High backpressure maker.<\/div>\n<\/div>\n<\/div>\n<\/p>","protected":false},"excerpt":{"rendered":"
Low Expansion Foam System Description Low expansion foam has an expansion of up to 20:1. The advantage of low expansion foam compared to the other type of foam is the greater throw range and superior cooling effect, heat resistance and burn back resistance achieved by the higher water content. This characteristic make difficult to build […]<\/p>\n","protected":false},"author":1,"featured_media":0,"parent":1365,"menu_order":6,"comment_status":"closed","ping_status":"closed","template":"template-fullwidth.php","meta":[],"_links":{"self":[{"href":"https:\/\/www.sabo-esp.com\/en\/wp-json\/wp\/v2\/pages\/1661"}],"collection":[{"href":"https:\/\/www.sabo-esp.com\/en\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/www.sabo-esp.com\/en\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/www.sabo-esp.com\/en\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.sabo-esp.com\/en\/wp-json\/wp\/v2\/comments?post=1661"}],"version-history":[{"count":3,"href":"https:\/\/www.sabo-esp.com\/en\/wp-json\/wp\/v2\/pages\/1661\/revisions"}],"predecessor-version":[{"id":3775,"href":"https:\/\/www.sabo-esp.com\/en\/wp-json\/wp\/v2\/pages\/1661\/revisions\/3775"}],"up":[{"embeddable":true,"href":"https:\/\/www.sabo-esp.com\/en\/wp-json\/wp\/v2\/pages\/1365"}],"wp:attachment":[{"href":"https:\/\/www.sabo-esp.com\/en\/wp-json\/wp\/v2\/media?parent=1661"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
\nBody and flanges in carbon steel. Also possible in stainless steel.
\nFoam agent mixer included.
\nGlas rupture disk.<\/div>\n<\/div>\n
<\/a><\/div>\nSE-CE<\/a><\/h3>\n\nFoam chamber mod. SE-CE
\nBody and flanges in carbon steel. Also possible in stainless steel.
\nFoam agent mixer included.
\nGlas rupture disk.<\/div>\n<\/div>\n\n<\/a><\/div>\nSE-VKS<\/a><\/h3>\n\nFoam pourer mod. SE-VKS
\nComplement to foam chambers SE-CS, SE-CE.<\/div>\n<\/div>\n\n<\/a><\/div>\nSE-LF<\/a><\/h3>\n\nFixed foam maker mod. SE-LF
\nFor stationary plants with low expansion foam, used for roof located floating tank or container basins fire protection.<\/div>\n<\/div>\n\n<\/a><\/div>\nSE-VF<\/a><\/h3>\n\nFoam pourer mod. SE-VF
\nUsed with model SE-CE foam chamber and model LF fixed foam nozzle.<\/div>\n<\/div>\n\n<\/a><\/div>\nSE-SHIELD-S<\/a><\/h3>\n\nRimseal foam pourer mod. SE-SHIELD-S
\nFor stationary plants with low expansion foam, used for floating roof tank. Foam generation on the rimseal. Able to test without pouring foam to the tank.<\/div>\n<\/div>\n\n<\/a><\/div>\nSE-BH<\/a><\/h3>\n\nRimseal foam pourer mod. SE-BH
\nFor stationary plants with low expansion foam, used for floating roof tank. Foam generation on the rimseal. Able to test without pouring foam to the tank.<\/div>\n<\/div>\n\n<\/a><\/div>\nSE-K<\/a><\/h3>\n\nHigh backpressure fixed foam maker mod. SE-K
\nSpecific fixed foam maker for tank. High backpressure maker.<\/div>\n<\/div>\n<\/div>\n<\/p>","protected":false},"excerpt":{"rendered":"
Low Expansion Foam System Description Low expansion foam has an expansion of up to 20:1. The advantage of low expansion foam compared to the other type of foam is the greater throw range and superior cooling effect, heat resistance and burn back resistance achieved by the higher water content. This characteristic make difficult to build […]<\/p>\n","protected":false},"author":1,"featured_media":0,"parent":1365,"menu_order":6,"comment_status":"closed","ping_status":"closed","template":"template-fullwidth.php","meta":[],"_links":{"self":[{"href":"https:\/\/www.sabo-esp.com\/en\/wp-json\/wp\/v2\/pages\/1661"}],"collection":[{"href":"https:\/\/www.sabo-esp.com\/en\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/www.sabo-esp.com\/en\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/www.sabo-esp.com\/en\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.sabo-esp.com\/en\/wp-json\/wp\/v2\/comments?post=1661"}],"version-history":[{"count":3,"href":"https:\/\/www.sabo-esp.com\/en\/wp-json\/wp\/v2\/pages\/1661\/revisions"}],"predecessor-version":[{"id":3775,"href":"https:\/\/www.sabo-esp.com\/en\/wp-json\/wp\/v2\/pages\/1661\/revisions\/3775"}],"up":[{"embeddable":true,"href":"https:\/\/www.sabo-esp.com\/en\/wp-json\/wp\/v2\/pages\/1365"}],"wp:attachment":[{"href":"https:\/\/www.sabo-esp.com\/en\/wp-json\/wp\/v2\/media?parent=1661"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
\nBody and flanges in carbon steel. Also possible in stainless steel.
\nFoam agent mixer included.
\nGlas rupture disk.<\/div>\n<\/div>\n
<\/a><\/div>\nSE-VKS<\/a><\/h3>\n\nFoam pourer mod. SE-VKS
\nComplement to foam chambers SE-CS, SE-CE.<\/div>\n<\/div>\n\n<\/a><\/div>\nSE-LF<\/a><\/h3>\n\nFixed foam maker mod. SE-LF
\nFor stationary plants with low expansion foam, used for roof located floating tank or container basins fire protection.<\/div>\n<\/div>\n\n<\/a><\/div>\nSE-VF<\/a><\/h3>\n\nFoam pourer mod. SE-VF
\nUsed with model SE-CE foam chamber and model LF fixed foam nozzle.<\/div>\n<\/div>\n\n<\/a><\/div>\nSE-SHIELD-S<\/a><\/h3>\n\nRimseal foam pourer mod. SE-SHIELD-S
\nFor stationary plants with low expansion foam, used for floating roof tank. Foam generation on the rimseal. Able to test without pouring foam to the tank.<\/div>\n<\/div>\n\n<\/a><\/div>\nSE-BH<\/a><\/h3>\n\nRimseal foam pourer mod. SE-BH
\nFor stationary plants with low expansion foam, used for floating roof tank. Foam generation on the rimseal. Able to test without pouring foam to the tank.<\/div>\n<\/div>\n\n<\/a><\/div>\nSE-K<\/a><\/h3>\n\nHigh backpressure fixed foam maker mod. SE-K
\nSpecific fixed foam maker for tank. High backpressure maker.<\/div>\n<\/div>\n<\/div>\n<\/p>","protected":false},"excerpt":{"rendered":"
Low Expansion Foam System Description Low expansion foam has an expansion of up to 20:1. The advantage of low expansion foam compared to the other type of foam is the greater throw range and superior cooling effect, heat resistance and burn back resistance achieved by the higher water content. This characteristic make difficult to build […]<\/p>\n","protected":false},"author":1,"featured_media":0,"parent":1365,"menu_order":6,"comment_status":"closed","ping_status":"closed","template":"template-fullwidth.php","meta":[],"_links":{"self":[{"href":"https:\/\/www.sabo-esp.com\/en\/wp-json\/wp\/v2\/pages\/1661"}],"collection":[{"href":"https:\/\/www.sabo-esp.com\/en\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/www.sabo-esp.com\/en\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/www.sabo-esp.com\/en\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.sabo-esp.com\/en\/wp-json\/wp\/v2\/comments?post=1661"}],"version-history":[{"count":3,"href":"https:\/\/www.sabo-esp.com\/en\/wp-json\/wp\/v2\/pages\/1661\/revisions"}],"predecessor-version":[{"id":3775,"href":"https:\/\/www.sabo-esp.com\/en\/wp-json\/wp\/v2\/pages\/1661\/revisions\/3775"}],"up":[{"embeddable":true,"href":"https:\/\/www.sabo-esp.com\/en\/wp-json\/wp\/v2\/pages\/1365"}],"wp:attachment":[{"href":"https:\/\/www.sabo-esp.com\/en\/wp-json\/wp\/v2\/media?parent=1661"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
\nComplement to foam chambers SE-CS, SE-CE.<\/div>\n<\/div>\n
<\/a><\/div>\nSE-LF<\/a><\/h3>\n\nFixed foam maker mod. SE-LF
\nFor stationary plants with low expansion foam, used for roof located floating tank or container basins fire protection.<\/div>\n<\/div>\n\n<\/a><\/div>\nSE-VF<\/a><\/h3>\n\nFoam pourer mod. SE-VF
\nUsed with model SE-CE foam chamber and model LF fixed foam nozzle.<\/div>\n<\/div>\n\n<\/a><\/div>\nSE-SHIELD-S<\/a><\/h3>\n\nRimseal foam pourer mod. SE-SHIELD-S
\nFor stationary plants with low expansion foam, used for floating roof tank. Foam generation on the rimseal. Able to test without pouring foam to the tank.<\/div>\n<\/div>\n\n<\/a><\/div>\nSE-BH<\/a><\/h3>\n\nRimseal foam pourer mod. SE-BH
\nFor stationary plants with low expansion foam, used for floating roof tank. Foam generation on the rimseal. Able to test without pouring foam to the tank.<\/div>\n<\/div>\n\n<\/a><\/div>\nSE-K<\/a><\/h3>\n\nHigh backpressure fixed foam maker mod. SE-K
\nSpecific fixed foam maker for tank. High backpressure maker.<\/div>\n<\/div>\n<\/div>\n<\/p>","protected":false},"excerpt":{"rendered":"
Low Expansion Foam System Description Low expansion foam has an expansion of up to 20:1. The advantage of low expansion foam compared to the other type of foam is the greater throw range and superior cooling effect, heat resistance and burn back resistance achieved by the higher water content. This characteristic make difficult to build […]<\/p>\n","protected":false},"author":1,"featured_media":0,"parent":1365,"menu_order":6,"comment_status":"closed","ping_status":"closed","template":"template-fullwidth.php","meta":[],"_links":{"self":[{"href":"https:\/\/www.sabo-esp.com\/en\/wp-json\/wp\/v2\/pages\/1661"}],"collection":[{"href":"https:\/\/www.sabo-esp.com\/en\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/www.sabo-esp.com\/en\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/www.sabo-esp.com\/en\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.sabo-esp.com\/en\/wp-json\/wp\/v2\/comments?post=1661"}],"version-history":[{"count":3,"href":"https:\/\/www.sabo-esp.com\/en\/wp-json\/wp\/v2\/pages\/1661\/revisions"}],"predecessor-version":[{"id":3775,"href":"https:\/\/www.sabo-esp.com\/en\/wp-json\/wp\/v2\/pages\/1661\/revisions\/3775"}],"up":[{"embeddable":true,"href":"https:\/\/www.sabo-esp.com\/en\/wp-json\/wp\/v2\/pages\/1365"}],"wp:attachment":[{"href":"https:\/\/www.sabo-esp.com\/en\/wp-json\/wp\/v2\/media?parent=1661"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
\nFor stationary plants with low expansion foam, used for roof located floating tank or container basins fire protection.<\/div>\n<\/div>\n
<\/a><\/div>\nSE-VF<\/a><\/h3>\n\nFoam pourer mod. SE-VF
\nUsed with model SE-CE foam chamber and model LF fixed foam nozzle.<\/div>\n<\/div>\n\n<\/a><\/div>\nSE-SHIELD-S<\/a><\/h3>\n\nRimseal foam pourer mod. SE-SHIELD-S
\nFor stationary plants with low expansion foam, used for floating roof tank. Foam generation on the rimseal. Able to test without pouring foam to the tank.<\/div>\n<\/div>\n\n<\/a><\/div>\nSE-BH<\/a><\/h3>\n\nRimseal foam pourer mod. SE-BH
\nFor stationary plants with low expansion foam, used for floating roof tank. Foam generation on the rimseal. Able to test without pouring foam to the tank.<\/div>\n<\/div>\n\n<\/a><\/div>\nSE-K<\/a><\/h3>\n\nHigh backpressure fixed foam maker mod. SE-K
\nSpecific fixed foam maker for tank. High backpressure maker.<\/div>\n<\/div>\n<\/div>\n<\/p>","protected":false},"excerpt":{"rendered":"
Low Expansion Foam System Description Low expansion foam has an expansion of up to 20:1. The advantage of low expansion foam compared to the other type of foam is the greater throw range and superior cooling effect, heat resistance and burn back resistance achieved by the higher water content. This characteristic make difficult to build […]<\/p>\n","protected":false},"author":1,"featured_media":0,"parent":1365,"menu_order":6,"comment_status":"closed","ping_status":"closed","template":"template-fullwidth.php","meta":[],"_links":{"self":[{"href":"https:\/\/www.sabo-esp.com\/en\/wp-json\/wp\/v2\/pages\/1661"}],"collection":[{"href":"https:\/\/www.sabo-esp.com\/en\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/www.sabo-esp.com\/en\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/www.sabo-esp.com\/en\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.sabo-esp.com\/en\/wp-json\/wp\/v2\/comments?post=1661"}],"version-history":[{"count":3,"href":"https:\/\/www.sabo-esp.com\/en\/wp-json\/wp\/v2\/pages\/1661\/revisions"}],"predecessor-version":[{"id":3775,"href":"https:\/\/www.sabo-esp.com\/en\/wp-json\/wp\/v2\/pages\/1661\/revisions\/3775"}],"up":[{"embeddable":true,"href":"https:\/\/www.sabo-esp.com\/en\/wp-json\/wp\/v2\/pages\/1365"}],"wp:attachment":[{"href":"https:\/\/www.sabo-esp.com\/en\/wp-json\/wp\/v2\/media?parent=1661"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
\nUsed with model SE-CE foam chamber and model LF fixed foam nozzle.<\/div>\n<\/div>\n
<\/a><\/div>\nSE-SHIELD-S<\/a><\/h3>\n\nRimseal foam pourer mod. SE-SHIELD-S
\nFor stationary plants with low expansion foam, used for floating roof tank. Foam generation on the rimseal. Able to test without pouring foam to the tank.<\/div>\n<\/div>\n\n<\/a><\/div>\nSE-BH<\/a><\/h3>\n\nRimseal foam pourer mod. SE-BH
\nFor stationary plants with low expansion foam, used for floating roof tank. Foam generation on the rimseal. Able to test without pouring foam to the tank.<\/div>\n<\/div>\n\n<\/a><\/div>\nSE-K<\/a><\/h3>\n\nHigh backpressure fixed foam maker mod. SE-K
\nSpecific fixed foam maker for tank. High backpressure maker.<\/div>\n<\/div>\n<\/div>\n<\/p>","protected":false},"excerpt":{"rendered":"
Low Expansion Foam System Description Low expansion foam has an expansion of up to 20:1. The advantage of low expansion foam compared to the other type of foam is the greater throw range and superior cooling effect, heat resistance and burn back resistance achieved by the higher water content. This characteristic make difficult to build […]<\/p>\n","protected":false},"author":1,"featured_media":0,"parent":1365,"menu_order":6,"comment_status":"closed","ping_status":"closed","template":"template-fullwidth.php","meta":[],"_links":{"self":[{"href":"https:\/\/www.sabo-esp.com\/en\/wp-json\/wp\/v2\/pages\/1661"}],"collection":[{"href":"https:\/\/www.sabo-esp.com\/en\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/www.sabo-esp.com\/en\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/www.sabo-esp.com\/en\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.sabo-esp.com\/en\/wp-json\/wp\/v2\/comments?post=1661"}],"version-history":[{"count":3,"href":"https:\/\/www.sabo-esp.com\/en\/wp-json\/wp\/v2\/pages\/1661\/revisions"}],"predecessor-version":[{"id":3775,"href":"https:\/\/www.sabo-esp.com\/en\/wp-json\/wp\/v2\/pages\/1661\/revisions\/3775"}],"up":[{"embeddable":true,"href":"https:\/\/www.sabo-esp.com\/en\/wp-json\/wp\/v2\/pages\/1365"}],"wp:attachment":[{"href":"https:\/\/www.sabo-esp.com\/en\/wp-json\/wp\/v2\/media?parent=1661"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
\nFor stationary plants with low expansion foam, used for floating roof tank. Foam generation on the rimseal. Able to test without pouring foam to the tank.<\/div>\n<\/div>\n
<\/a><\/div>\nSE-BH<\/a><\/h3>\n\nRimseal foam pourer mod. SE-BH
\nFor stationary plants with low expansion foam, used for floating roof tank. Foam generation on the rimseal. Able to test without pouring foam to the tank.<\/div>\n<\/div>\n\n<\/a><\/div>\nSE-K<\/a><\/h3>\n\nHigh backpressure fixed foam maker mod. SE-K
\nSpecific fixed foam maker for tank. High backpressure maker.<\/div>\n<\/div>\n<\/div>\n<\/p>","protected":false},"excerpt":{"rendered":"
Low Expansion Foam System Description Low expansion foam has an expansion of up to 20:1. The advantage of low expansion foam compared to the other type of foam is the greater throw range and superior cooling effect, heat resistance and burn back resistance achieved by the higher water content. This characteristic make difficult to build […]<\/p>\n","protected":false},"author":1,"featured_media":0,"parent":1365,"menu_order":6,"comment_status":"closed","ping_status":"closed","template":"template-fullwidth.php","meta":[],"_links":{"self":[{"href":"https:\/\/www.sabo-esp.com\/en\/wp-json\/wp\/v2\/pages\/1661"}],"collection":[{"href":"https:\/\/www.sabo-esp.com\/en\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/www.sabo-esp.com\/en\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/www.sabo-esp.com\/en\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.sabo-esp.com\/en\/wp-json\/wp\/v2\/comments?post=1661"}],"version-history":[{"count":3,"href":"https:\/\/www.sabo-esp.com\/en\/wp-json\/wp\/v2\/pages\/1661\/revisions"}],"predecessor-version":[{"id":3775,"href":"https:\/\/www.sabo-esp.com\/en\/wp-json\/wp\/v2\/pages\/1661\/revisions\/3775"}],"up":[{"embeddable":true,"href":"https:\/\/www.sabo-esp.com\/en\/wp-json\/wp\/v2\/pages\/1365"}],"wp:attachment":[{"href":"https:\/\/www.sabo-esp.com\/en\/wp-json\/wp\/v2\/media?parent=1661"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
\nFor stationary plants with low expansion foam, used for floating roof tank. Foam generation on the rimseal. Able to test without pouring foam to the tank.<\/div>\n<\/div>\n
<\/a><\/div>\nSE-K<\/a><\/h3>\n\nHigh backpressure fixed foam maker mod. SE-K
\nSpecific fixed foam maker for tank. High backpressure maker.<\/div>\n<\/div>\n<\/div>\n<\/p>","protected":false},"excerpt":{"rendered":"
Low Expansion Foam System Description Low expansion foam has an expansion of up to 20:1. The advantage of low expansion foam compared to the other type of foam is the greater throw range and superior cooling effect, heat resistance and burn back resistance achieved by the higher water content. This characteristic make difficult to build […]<\/p>\n","protected":false},"author":1,"featured_media":0,"parent":1365,"menu_order":6,"comment_status":"closed","ping_status":"closed","template":"template-fullwidth.php","meta":[],"_links":{"self":[{"href":"https:\/\/www.sabo-esp.com\/en\/wp-json\/wp\/v2\/pages\/1661"}],"collection":[{"href":"https:\/\/www.sabo-esp.com\/en\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/www.sabo-esp.com\/en\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/www.sabo-esp.com\/en\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.sabo-esp.com\/en\/wp-json\/wp\/v2\/comments?post=1661"}],"version-history":[{"count":3,"href":"https:\/\/www.sabo-esp.com\/en\/wp-json\/wp\/v2\/pages\/1661\/revisions"}],"predecessor-version":[{"id":3775,"href":"https:\/\/www.sabo-esp.com\/en\/wp-json\/wp\/v2\/pages\/1661\/revisions\/3775"}],"up":[{"embeddable":true,"href":"https:\/\/www.sabo-esp.com\/en\/wp-json\/wp\/v2\/pages\/1365"}],"wp:attachment":[{"href":"https:\/\/www.sabo-esp.com\/en\/wp-json\/wp\/v2\/media?parent=1661"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}
\nSpecific fixed foam maker for tank. High backpressure maker.<\/div>\n<\/div>\n<\/div>\n
<\/p>","protected":false},"excerpt":{"rendered":"
Low Expansion Foam System Description Low expansion foam has an expansion of up to 20:1. The advantage of low expansion foam compared to the other type of foam is the greater throw range and superior cooling effect, heat resistance and burn back resistance achieved by the higher water content. This characteristic make difficult to build […]<\/p>\n","protected":false},"author":1,"featured_media":0,"parent":1365,"menu_order":6,"comment_status":"closed","ping_status":"closed","template":"template-fullwidth.php","meta":[],"_links":{"self":[{"href":"https:\/\/www.sabo-esp.com\/en\/wp-json\/wp\/v2\/pages\/1661"}],"collection":[{"href":"https:\/\/www.sabo-esp.com\/en\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/www.sabo-esp.com\/en\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/www.sabo-esp.com\/en\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.sabo-esp.com\/en\/wp-json\/wp\/v2\/comments?post=1661"}],"version-history":[{"count":3,"href":"https:\/\/www.sabo-esp.com\/en\/wp-json\/wp\/v2\/pages\/1661\/revisions"}],"predecessor-version":[{"id":3775,"href":"https:\/\/www.sabo-esp.com\/en\/wp-json\/wp\/v2\/pages\/1661\/revisions\/3775"}],"up":[{"embeddable":true,"href":"https:\/\/www.sabo-esp.com\/en\/wp-json\/wp\/v2\/pages\/1365"}],"wp:attachment":[{"href":"https:\/\/www.sabo-esp.com\/en\/wp-json\/wp\/v2\/media?parent=1661"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}