Vertical pressure proportioning system with foam concentrate inside of the bladder mod. SE-MXC-I

For stationary systems using low, medium or high expansion foam. It requires no electrical connection and therefore is suitable where absolute reliability and low maintenance are requirements. It is used for concentrate stocking. Its vertical configuration makes it ideal for areas with limited floor space but available height.

Construction features
Construction code: I.S.P.E.S.L./A.S.M.E.
Design pressure: 12 bar
Maximum working pressure: 12 bar;16 bar/12 bar;16 bar • Test pressure (tank): 17.2 bar;22,9 bar/18 bar;24 bar
Design temperature: -10°C +50°C (+65°C)
Body material: carbon steel ASTM A 516 gr.70 or others
Flanges material: carbon steel (ASTM A 105)
Pipe material: carbon steel (ASTM A 106 gr. B)
Cut-off ball valves material: carbon steel (body), AISI 316 (ball)
Filling valve, drain valve, material: nickel plated brass (body), AISI 316 (ball)
Pressure gauges material: stainless steel
Safety valve material: brass
Water and concentrate foam diaphragms material: AISI 316 stainless steel
Bladder material: hypalon-neoprene / Polyurethane
Name plate material: aluminum
Finish: polyurethane enamel (RAL 3000)
Standard flow direction: right (from left to right)
Packing: body, pallet.
Optional
ASME or TÜV code
Different design, working and test pressures to the standard
values
Different design temperature to the standard values
Corrosion allowance
Fill pump with hoses
Left flow direction (from right to left)
Alternate materials and components
X-ray weld test
Different finish specifications
Hydraulic and/or functional test witnessed
I.S.P.E.S.L. certification
Special packing
Standard Documentation
Warranty certificate
Hydraulic pressure test certificate
Operating, filling and maintenance manual (Spanish, Italian,
English or French languages)
Optional Documentation
(with extra cost)
Drawings
Material certificates
Elliptical heads and shell thickness calculations
Other operating, maintenance and filling manual language
Other certificates (ex.: painting, order compliance, etc.)
Copy of X-ray weld test report, with X-ray map
Copy of Procedure Qualification Record (PQR) and Welding Procedure Specification (WPS) issued by I.S.P.E.S.L. or ASME
Data necessary
(Must always be specified on order, to define bladder tank)
Model and capacity
Construction code
Design pressure
Flow direction
Mixer data: size, min. and max. flow, mixing ratio, flange type DIN or ANSI
Any options
Any OPTIONAL documentation
Related Products

SE-MXC-I-2X , SE-MXC-H-I , SE-MIX , SE-WRM , SE-HYD

    • Español
    • English
    • Français
    • Ruso